5 of 9
ACA-E5/ZXP-E5 PROGRAMMING
Once the equipment is installed and connected you must program the ACA-E5/ZXP-E5 according to
Russound guidelines. The Sphere system is programmed using SCS-E5 software, and may be
programmed via Ethernet, USB, or serial. Special steps that relate to ELAN are provided below:
I
MPORTANT NOTE:
To avoid any conflict or odd behavior disconnect the serial cable from the ELAN controller prior to
programming the Russound devices.
M
ULTIPLE ACA-E5/ZXP-E5 UNITS
If you need more than 8 zones, you can add additional ACA-E5 or ZXP-E5 units: the maximum number of
units is 6, which delivers audio in up to 48 zones.
When you configure the ACA-E5/ZXP-E5 in the ELAN system, you will need to know the Controller
Number for each. Set the Controller Number for the first ACA-E5 to 1, the second to 2, and so on.
ST2
AM/FM, XM, SIRIUS TUNER SOURCES
If you have a ST2 tuner, then you will need to know the Tuner ID for each tuner. Since each ST2 has two
built in tuners, there are two IDs that you must know for each ST2.
In addition, the Tuner ID must be the same as the corresponding source number of the ACA-E5/ZXP-E5.
In other words, if a tuner is connected as source #1, then that tuner must have a RNet/Tuner ID of 1.
The ST2 factory defaults for the Tuner IDs are tuner #1 = 1, and tuner #2 = 2, which corresponds to
connecting the ST2 into the ACA-E5/ZXP-E5 sources 1 and 2. For the ST2-XM tuner, the factory
defaults are the XM tuner is #1 and the AM/FM tuner is #2. For the ST2-Sirius tuner, the factory defaults
are the Sirius tuner is #1 and the AM/FM tuner is #2.
Consult the ST2 documentation for instructions on checking or changing the tuner IDs.
ACA-E5
INTERNAL TUNER
The ACA-E5 includes an AM/FM tuner set to source/RNet ID 12, which is optional (you may choose to
use 12 as an input instead). The ACA-E5 also includes a slot for optional AM/FM, XM or Sirius modules
to be installed, setup on source/RNet ID 11. In all cases, the tuner must be accurately programmed in
Russound software for control via ELAN. The Tuner ID must be the same as the corresponding source
number of the ACA-E5/ZXP-E5. In other words, if a tuner is connected as source #1, then that tuner
must have a RNet/Tuner ID of 1
F
IRMWARE REVISIONS
ELAN has tested the Sphere system with the following firmware revisions. To obtain the firmware
revisions of your equipment, use the SCS-E5 software to connect to the unit. Open the Tools Menu, and
choose System Check to Perform a System Check. This will display current firmware of all devices
installed.
ACA-E5
ACA-E5
Internal
AM/FM
Tuner
ZXP-E5
iBridge
Dock
ST-2 XM
Tuner
ST-2 AM/FM
Tuner
SMS3
App v03.00.06/01.04.12
Boot v01.01.03
App
v03.00.06
App
v01.00.00
App
v2.03.01
App
v4.00.13
App
v4.01.00
App
v3.02.00
(14 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern